Universal Motion Inc.
About our Company

Much more than just selling equipment, UMI desires to meet the needs of its customers. With this purpose in mind, UMI does its best to understand their problems and present the maximum number possible of solutions.UMI staff is highly concerned about the equipment application, norms and procedures to be followed, types of tests, operation of machine etc., in order to guarantee its customers' satisfaction with equipment and services.


UMI - 114
Curing Tank

  • 24-Hour Cycle from time of mixing.
  • Controlled 35°C or 100°C ±2°C Curing Temperature for Concrete.
  • Controlled 27°C±2°C Curing Temperature for grey cement.
The tank has been designed to accommodate 150 mm/70.6 mm cube moulds upto 36/72 cube moulds and fully insulated, complete with a hinged lid, heater,thermostat and recirculated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35°C or 100°C±2°C/27°C±2°C, expect for the 15 minutes after immersion of the freshly made specimens.
Curing Tank for6/12 moulds of 150mm/70.6 mm size
Curing Tank for 12/24 moulds of 150mm/70.6 mm size
Curing Tank for 24/48 moulds of 150mm/70.6 mm size
Curing Tank for 36/72 moulds of 150mm/70.6 mm size
Note : Accelerated curing tank with cooling arrangement is also available on request.