UMI - 139 - 2
Vibration Machine,
Ref. Standard IS:4031, IS:10080
A specially designed Vibration Machine is used for vibrating the mix in moulds according to strictly controlled programme at a frequency of 12,000 ± 400 cycles per minute.The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft.The centre of gravity of the vibrator, including the cube and mould, is either at the centre of the eccentric shaft or within 25 mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds. Each machine is certified for its frequency by the National Council of Cement and Building Materials (NCCBM). The machine is suitable for operation on 220 V, 50 Hz, single phase, AC supply. Each machine is supplied with one cube mould (steel) with ISI Certification Mark.
The following spares can be ordered as optional extra :
Mould, Steel, for 70.6 mm Cube with
ISI Certification Mark as per IS:10080
Spares
Side Spring
Supporting Springs (Set of four)
Springs, for Fitting Mould (Set of two)
Endless Belt
Belt Guard
About
About our Company
Much more than just selling equipment, UMI desires to meet the needs of its customers. With this purpose in mind, UMI does its best to understand their problems and present the maximum number possible of solutions.UMI staff is highly concerned about the equipment application, norms and procedures to be followed, types of tests, operation of machine etc., in order to guarantee its customers' satisfaction with equipment and services.