Pensky Martens
Ref. Standards IS:1209, IS : 1448 (Part 21),ASTM D 93, BS:2839, ISO 2719, DIN 51758, AFNOR M/07-019, IP34
For determining the flash point of fuel oils and lubricating oil, bitumen other than cutback bitumen and suspension of solids in liquids, having a flash point above 49°C.
The oil Cup is made of brass, fitted with a thermally insulated lifting handle.
The cup lid, with insulated handle, is fitted with two opposite wedge cams, which engage under pillars secures to the cup flange. This feature facilitates easy removal of the lid by rotating the handle a few degrees to disengage the cams. The shutter opening mechanism is designed for smooth operation and is operated by a spring handle with a knurled knob. A flame exposure device (Gas test jet assembly) is mounted over the lid. The manually operated stirrer has a flexible shaft. The cup assembly is positioned is a cast iron air bath, fitted with a chrome plated brass to. The air bath is mounted on an upright which serves as a gas manifold. Valve controlled supply lines for adjustable flames are provided with open flash clip, in accordance with IS:1448 (P:66), IS:1209, IP35.
Flash Point (Closed)
Pensky-Martens Apparatus
with MPL Certificate, Electrical heating, with gas test jet and electric regulator. Suitable for operation on 220, 50 Hz, Single Phase, AC Supply. Complete in wooden carrying case.
Flash Point (Closed) Pensky-Martens Apparatuswithout NPL Certificate
Flash Point (Open) and fire Point Pensky-Martens Apparatus with NPL Certificate.
Electrical heating with gas test jet and electric heater with energy regulator.
Suitable for operation on 220 V, 50Hz, Single phase, AC supply.
Complete in a wooden carrying case.
Flash Point (Open) and Fire Point Pensky-Martens Apparatus without NPL Certificate
Essential Extras
Thermometer IP 15C,
Range : -5° C to +110° C
Thermometer IP 16C,
Range : 90° C to +370° C
Replacement Parts
Pensky-Martens Oil Cup
Pensky-Martens Lid, Shutter with Gas Test Jet
About
About our Company
Much more than just selling equipment, UMI desires to meet the needs of its customers. With this purpose in mind, UMI does its best to understand their problems and present the maximum number possible of solutions.UMI staff is highly concerned about the equipment application, norms and procedures to be followed, types of tests, operation of machine etc., in order to guarantee its customers' satisfaction with equipment and services.