Gauging Trowel
UMI - 117 Ref. Standard IS:4031
100 to 150 mm long blade with straight edge. Weight 210 ± 10 g
Ref. Standard IS:5515,
200 mm long blade Weight 210 ± 10 g
Spatula
UMI - 119Ref. Standard IS:269, BS:12
For the preparation of tensile specimens.
Weight not exceeding 340 g
Mortar Flow Apparatus
UMI - 125
The Flow Test is carried out as recommended in IS:1727, 2645, 4031, 6932 (Part 8) on cement mortars, pozzolanas and limes. The specimen is placed on a flow table top which then raised and dropped through a known height.
Ref. Standard,
IS:5512
Flow Table, Electrically Operated
The Flow Table consists of a brass table top 250 ± 2.5 mm dia, mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to drop through 12 mm bya ground and hardened cam.
The Motor Drive assembly using the gear box is designed to rotate the cam through the shaft at 100 rpm.
Suitable for operation on 220 V, 50 Hz, single phase AC supply
Complete with Flow mould 100 mm base dia, 70 mm top dia and 50 mm high.
